damage threshold

Although the porous silica antireflective ( AR) coating has high laser damage threshold after heat treatment, its transmission is correlated with environment relative humidity due to many Si-OH hydrophilic groups on the coating surface.

多孔SiO2膜层经热处理后，具有很高的激光破坏阈值，但是结构中有许多Si-OH亲水基团，导致光学透过率受环境相对湿度的影响很大。

The experiment shows that the saturated energy threshold of CCD element is 0.45 μ J/ cm~ 2.The CCD is damaged by six pulses with energy density of 0.14 J/ cm~ 2 and the damage is due to lattice heat and evaporation with plasma.

结果表明：激光能量密度为0.45μJ/cm2时，达到像元饱和；能量密度为0.14J/cm2时，辐照6个脉冲后实现了CCD器件的硬损伤，硬损伤源于晶格被加热并汽化形成等离子体；

Also provided the complementary consideration of laser blinding application under dynamic retinal model, it showed that the stationary damage threshold needed a multiplicative factor to attain the same blinding effect under stationary model theory.

并在动态视网膜模型下对激光致盲应用提出了补充考虑，为/达到静态模型理论下同样的致盲效果，需要对静态损伤阈值给以一个乘性因子。

Undid previous damage return threshold change on Exorcism.

取消了上次对DP大招的改动.

Study on Organosilicone Composite Antireflective Coating with High Laser Damage Threshold for Ti-Sapphire

钛宝石强激光负载的有机硅复合凝胶增透膜研究

In the numerical calculation, known the damage threshold can make the results well comparison.

在数值计算中，已知损伤阈值可以使计算结果得到很好的对照。

Known the damage threshold of the experimental materials can be a good guide.

已知实验材料的损伤阈值可以对实验有一个很好的指导作用。

The laser induced damage threshold of optical films has the high meaning to the laser technology.

光学薄膜的抗激光损伤阈值对激光技术而言具有重大的意义.

The methods of laser damage detection and laser induced damage threshold ( LIDT ) were introduced.

介绍了激光损伤的检测及损伤阈值的测量方法.

The theoretical research shows that the SBS induced damage mostly happens at the entrance surface of pump laser and the threshold intensity is inversely proportional to laser pulse width and the interaction length.

研究发现，SBS作为一种破坏机制，表现为前表面破坏，且破坏阈值与激光脉宽以及作用区长度均成反比。

Film damage threshold is the key parameter of thin-film anti-Intense Laser.

薄膜损伤阈值是薄膜抗强激光作用的关键参数。

Instead of using continuous variables topology optimization, discrete variables topology optimization is used in multi-damage identification of two-dimensional structure with the hole damages to avoid the possible negative impaction which is brought by the threshold parameter determination in using continuous variables topology optimization.

采用离散变量变量拓扑优化代替连续变量拓扑优化对发生孔洞损伤形式的二维结构进行损伤识别，避免了利用连续变量拓扑优化进行损伤识别时参数阈值的确定可能给识别结果带来的不良影响。